How To Change Iphone 6 Battery

How To Change Iphone 6 Battery. Remove the two 3.6 mm p2 pentalobe screws next to the lightning connector. Detach the battery flex cable from the logic board.

Exchangeable Battery for iPhone 6S+/6+, iPhone 6S/6? ETrade Supply
Exchangeable Battery for iPhone 6S+/6+, iPhone 6S/6? ETrade Supply from www.etradesupply.com

First up, you’ll need a new battery. The strip will stretch to many times its original length. Get a replacement battery for the iphone 6.

Before Disassembling Your Iphone, Discharge The Battery Below 25%.


In some cases, there may be a cost associated with the repair. Begin by pulling the screen carefully up with the suction cup. Awesome little smart phone tool kit on amazon:

Remove The Two Screws At The Bottom Right Side Of The Battery Which Secure A Metal Plate And Remove The Metal Battery Connector Plate.


Lift the assembly away from the iphone and set it aside. If your iphone has any damage that impairs the replacement of the battery, such as a cracked screen, that issue will need to be resolved prior to the battery replacement. Separate the screen from the back housing.

For Best Results, Pull The Strip At A 60º Angle Or Less.


Avoid waiting for an appointment or travelling to a store. This blog introduces a detailed tutorial on how to change iphone 6, iphone7 battery. Remove the two 3.6 mm p2 pentalobe screws next to the lightning connector.

If You Need A Battery Replacement, Your Warranty Probably Bit The Big One Already.


Power off your iphone before beginning disassembly. Get a replacement battery for the iphone 6. Check if you have applecare+ by entering your iphone serial number.

Turn Off Your Iphone 6 And Unscrew The Two Pentalobe Bottom Screws Next To The Charging Port.


Now to get to the iphone 6 battery replacement first, take a look at the bottom of your iphone 6 near the lightning port. See the chart below for battery replacement pricing for all iphone models. If you’ve purchased a battery replacement kit you should have received a pentalobe screwdriver to use for this step.

banner